Battery Removal & Disposal Care and Maintenance
To improve the performance and life of your unit, we recommend you
do the following:
1. Once a month clean the unit with a dry cloth, including the chamber which
the dust container fits into. Remove any hair, fiber or other materials that
may have built up in the chamber, on the rotating brush or edging tool.
2. Don’t use abrasive materials to clean the sweeper. Do not immerse the
unit in water.
3. Do not pick up liquids or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces .
5. Don’t pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.
NOTE : If uncertain as to how to remove your battery pack, we
suggest you take your sweeper to a reputable small
appliance service technician to have this service performed.
Follow these steps when battery removal is required.
This sweeper is equipped with Ni-Cd batteries and you need to dispose of them
properly. When the batteries are no longer good for use, they must be removed from
the sweeper for disposal. Do not remove the batteries for any reason other than
disposal of them. Call your nearest recycling center for information on the
recycling and disposal of Ni-Cd batteries.
WARNING: You must never use ordinary batteries for replacement as these
may leak and cause damage. Use only battery pack XBP610
provided by EURO-PRO Corporation for replacement.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
SWEEPER WILL NOT
OPERATE
1. Batteries discharged.
2. No power in electrical
outlet supplying
transformer.
3. Unit needs servicing.
1. Charge unit.
2. Check fuse or breaker.
Replace fuse/reset breaker.
3. Call Customer Service.
SWEEPER WILL NOT
PICK-UP OR
SUCTION POWER IS
WEAK
1. Dust container is full.
2. Unit needs recharging.
1. Empty dust container.
2. Charge unit.
DUST ESCAPING
FROM SWEEPER
1. Dust container is full.
1. Empty dust container.
ROTATING BRUSH
WILL NOT PICK UP
1. Unit clogged.
2. Dust container is full.
1. Check for excessive material
on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.
2. Empty and clean dust
container.
SWEEPER WILL NOT
CHARGE
1. Electrical outlet not
working
2. Charging Adapter not
working
3. Batteries no longer
functioning
1. Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2. Replace charging adapter
3. See battery disposal pg. 8.
9
Removal of Battery Pack
1. Remove the extention handles and dust cup container.
2. Turn unit over so that the base is facing upwards. (Fig. 15)
3. With a #2 Phillips screwdiver, remove the screw securing the battery pack
compartment cover to the unit and place aside. (Fig. 16)
4. Remove the old battery pack from the unit.
5. Detach the battery pack compartment cover from the battery pack and place
aside.
6. Insert the new battery pack into the battery compartment cover and slide into the
unit.
7. Replace screw to secure the battery compartment cover to the unit.
CAUTION: This appliance contains Ni-Cd batteries. The batteries must be
recycled or disposed of properly.
Fig. 16
Fig. 15
8
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals