Euro-Pro Shark SV736K User's Guide download pdf (Page 3)

OPERATING INSTRUCTIONS

Charging Your Vacuum Cleaner

1. This cordless vacuum is powered by

rechargeable nickel-cadmium

batteries. Before using the vacuum,

charge the vacuum cleaner for a

minimum of 20 hours.

NOTE: Ensure that the On/Off switch is

in the “Off” position before charging.

Assembly

NOTE: Dust cup filter must always be

used when operating the hand

vacuum.

1. To open the dust cup compartment,

push the dust cup release button

and remove the dust cup

container. (Fig. 2)

2. Verify that the dust cup filter is

inside, then re-attach the dust cup

container to the hand vacuum.

(Fig. 3)

3

NOTE: Peak performance may only

be realized after the unit has been

charged and discharged two (2) or

three (3) times.

IMPORTANT:To maintain peak

performance of your cordless hand

vacuum, it is recommended that the

unit be fully discharged, then

completely re-charged at least once a

month.

3. To attach the crevice tool to the

hand vacuum, push the attachment

into the suction hole in the front of

the dust container. (Fig. 4)

Fig. 2

Fig. 3

2. Connect the charging jack to the

charging hole that is on the back of

the unit.

3. Plug the charger into wall outlet.

4. The charging indicator light

will shine green to indicate that the

vacuum cleaner being charged.

(Fig. 1)

Fig. 1

Fig. 4

Fig. 6

Fig. 5

Metal

Contact

Pins

Using Your Cordless Vacuum

1. To start the unit, push the "On/Off"

switch to the "On" position.

2. To stop the vacuum cleaner, slide

the "On/Off" switch to the "Off"

position.

3. A crevice tool is provided for

cleaning narrow, hard to reach

places.

OPERATING INSTRUCTIONS

Changing & Cleaning the Dust

Cup Filter

For best performance, empty the dust

cup container and clean the dust cup

filter after each use.

1. To remove the dust cup container,

press down on the dust cup release

button and pull off the dust cup

container.

2. Pull out the dust cup filter.

3. Empty the dust from the dust cup

container. (Fig. 7)

4. Rinse the dust cup filter in cold water,

and then wait until it dries completely

before replacing it back into the dust

cup container. DO NOT use a

washing machine to clean the dust

cup filter. DO NOT use a hair dryer to

dry it. Air dry only.

5. Replace the dust cup filter carefully

into the dust cup compartment.

NEVER operate vacuum cleaner

without dust cup filter in place.

6. Attach the dust cup container to the

cordless vacuum.

CAUTION: The suction hole must be

open and free of any obstructions at all

times. Otherwise, the motor will

overheat and could become damaged.

NOTE: It is recommended that the

dust cup filter be replaced every three

(3) months to ensure peak performance

of the unit.

4

WARNING: NEVER use ordinary

batteries for replacement, as these may

leak and damage your vacuum cleaner.

Fig. 7

Using Your Motorized Brush

1. Make sure that the “On/Off” switch

is in the "Off“ position.

2. Firmly insert the motorized brush

(Fig. 5) into the air-intake nozzle of

the dust cup container ensuring

that the contact pins are engaged

in the connector slots of the unit.

(Fig. 6)

NOTE: The motorized brush is for

vacuuming short pile carpets or rugs.

WARNING:DO NOTtouch the

motorized brush while it is in motion.

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments