Euro-Pro 374 Instruction Manual download pdf (Page 13)

DRAWING UP THE BOBBIN THREAD

1.Hold the end of the needle thread with your left hand.

2.Turn the balance wheel slowly towards you with your right

hand until the needle goes down and comes up. Then stop

the balance wheel when the take-up lever is at its highest

position.

Lightly draw up the needle thread forming a loop with the

bobbin thread.

3.Puil about 15cm (6 inches) of both threads away from you

under the presser foot.

needle thread

needle

thread

bobbin

thread

zigzag foot

STRAIGHT STITCH AND ZIGZAG STITCH

Model 377 Model 374

Presser foot

Pattern selector

Stitch length dial

Model 373/372/372H

zigzag foot

M ( )

O ( )

A ( ) B ( )

(for straight gtitch)

(for straight stitch)

1 - 5 (54321) (for zigzag stitch)

0.3-4

C ( ) (for zigzag stitch)

( ) (for zigzag stitch)

( ) (for straight stitch)

Starting Sewing

1. Be sure both the threads are drawn back under the presser foot.

2. While holding the threads with your left hand, turn the balance

wheel toward you to bring the needle into the fabric where you

wish to start sewing.

3. Lower the presser foot, and press the speed controller gently,

then start sewing slowly.

*Sew a few reverse stitches by pushing reverse button for

reinforcing the end of seams.

*Raise the needle to its highest position before turning the

pattern selector dial and stitch width dial.

English

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 22 23

Comments to this Manuals

No comments

Euro-Pro 374 Instruction Manual Page 13

Comments to this Manuals

Related products and manuals for Sewing machines Euro-Pro 374